Probable cause:
1. The Easy-UPS is not turned on.
2. The Easy-UPS is not connected to the utility power supply.
3. Input circuit breaker on the Easy UPS is tripped.
Possible Solution:
1. Press the POWER ON/OFF button to turn on the Easy-UPS.
2. Check that the power cable from the Easy-UPS to the utility power supply is securely connected at both ends.
3. Turn on the circuit breaker in the rear panel.
In case if the issue persists even after trying the above troubleshooting, log the complaint.
1. The Easy-UPS is not turned on.
2. The Easy-UPS is not connected to the utility power supply.
3. Input circuit breaker on the Easy UPS is tripped.
Possible Solution:
1. Press the POWER ON/OFF button to turn on the Easy-UPS.
2. Check that the power cable from the Easy-UPS to the utility power supply is securely connected at both ends.
3. Turn on the circuit breaker in the rear panel.
In case if the issue persists even after trying the above troubleshooting, log the complaint.
Released for: Schneider Electric India
