Follow the Below step to check lan setting .in PAC--TDAVQ-QMS194142-00
1) Press "Prg" key to get option in the display.
2) Then select "Setting menu" option give enter.
3) By using "Up/down" button go to lan setting.
4) We can check & set, the number of unit in parallel & cycle time hours need to be run individual unit can be done in this setting.
5) To go back to main screen press "Esc" escape button two or three times.
1) Press "Prg" key to get option in the display.
2) Then select "Setting menu" option give enter.
3) By using "Up/down" button go to lan setting.
4) We can check & set, the number of unit in parallel & cycle time hours need to be run individual unit can be done in this setting.
5) To go back to main screen press "Esc" escape button two or three times.
Released for:Schneider Electric India
