EPS UPSs or SSC with GUI that the touch point is off
Public
Issue:
EPS UPSs or SSC with GUI that the touch point is off
Product line:
All EPS UPSs or SSC with GUI
Environment:
All EPS UPSs or SSC with GUI
Cause:
The touch point is off on the GUI and needs to be calibrated to reset touch point.
Resolution:
How to calibrate the GUI:
1. Click on Start->Settings->Control Panel->Stylus->Calibration->Recalibrate.
2. Calibrate the five point accurately.
3. Press ENTER if keyboard is connected else TAP on the screen, it will exit the calibration screen.
4. Save registry from Start->Programs->ColibriTools->SaveReg.
Issue:
EPS UPSs or SSC with GUI that the touch point is off
Product line:
All EPS UPSs or SSC with GUI
Environment:
All EPS UPSs or SSC with GUI
Cause:
The touch point is off on the GUI and needs to be calibrated to reset touch point.
Resolution:
How to calibrate the GUI:
1. Click on Start->Settings->Control Panel->Stylus->Calibration->Recalibrate.
2. Calibrate the five point accurately.
3. Press ENTER if keyboard is connected else TAP on the screen, it will exit the calibration screen.
4. Save registry from Start->Programs->ColibriTools->SaveReg.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.