What is the significance of dial settings (5, 10, 20 and 30) in white colour coded part when ground fault protection is disabled?
TeSys Giga electronic over-load relays are equipped with multiple control
in single adjustment dial.
The same dial can be used to set Ground Fault ON/OFF and the same time,
the trip call can also be selected by the same dial.
Setting on white side of the dial:
Setting on black side of the dial:
Similarly, the other dial is used to set phase imbalance ON/OFF,
and the relay RESET function can be selected as Manual or Automatic.
Setting on white side of the dial:
Setting on black side of the dial:
This feature helps to have multiple functions, increased flexibility and to protect motor under different fault conditions.
in single adjustment dial.
The same dial can be used to set Ground Fault ON/OFF and the same time,
the trip call can also be selected by the same dial.
Setting on white side of the dial:
- Ground Fault is OFF
- The trip class can be selected from Class 5e….30e
Setting on black side of the dial:
- Ground Fault is ON
- The trip class can be selected from Class 5e….30e
Similarly, the other dial is used to set phase imbalance ON/OFF,
and the relay RESET function can be selected as Manual or Automatic.
Setting on white side of the dial:
- Phase imbalance is OFF
- The relay to be reset with MANUAL function
Setting on black side of the dial:
- Phase imbalance is ON
- The relay is reset with AUTOMATIC function
This feature helps to have multiple functions, increased flexibility and to protect motor under different fault conditions.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.