How to complete the swtichboard with plates for PrismaSet Active in eDesign Small Building
Issue: Mounting all the components and plates in the switchboard to finish the project
Product Line: eDesign Small Building Small Building App
Cause: Basically, today after mounting all the components you think you have finished the project, but you must Add all the plates to finish the project.
Resolution:
- After configuring all your products, move to Front Face tab.
- Then Mount all your established products.
- Select the option View with faceplates from ENVELOPE section on the right side and click Add the finishing faceplates to complete your project.
Product Line: eDesign Small Building Small Building App
Cause: Basically, today after mounting all the components you think you have finished the project, but you must Add all the plates to finish the project.
Resolution:
- After configuring all your products, move to Front Face tab.
- Then Mount all your established products.
- Select the option View with faceplates from ENVELOPE section on the right side and click Add the finishing faceplates to complete your project.
- You can see the plates are added before you finish your project.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.