Why, in EcoStruxure Machine SCADA Expert, sometime the Site Code cannot be generated?
In EcoStruxure Machine SCADA expert, there are two kind of license
To find the Site Code, need to start "EcoStruxure Machine SCADA Expert 2020 Register" and select SoftKey
In some specific cases, the following error may occur
This FAQ will show how to avoid this error message
This article is application for EcoStruxure Machine SCADA Expert, all versions
This error may occur, when there are too much network card in the configuration.
The solution to be able to create the SiteCode in this situation, is to desactivate the not necessary network card and let only the main one.
In general this action is enough to fix the problem and generate the Site Code.
If the problem still occur, do not hesitate to contact the technical support
- Hardkey
- Softkey
To find the Site Code, need to start "EcoStruxure Machine SCADA Expert 2020 Register" and select SoftKey
In some specific cases, the following error may occur
This FAQ will show how to avoid this error message
This article is application for EcoStruxure Machine SCADA Expert, all versions
This error may occur, when there are too much network card in the configuration.
The solution to be able to create the SiteCode in this situation, is to desactivate the not necessary network card and let only the main one.
In general this action is enough to fix the problem and generate the Site Code.
If the problem still occur, do not hesitate to contact the technical support
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.