Powerlogic P7 - No Voltage Display Using Open Delta PT Scheme and 52A signal Not Responding
Issue:
The customer reports that voltages are not displayed and the 52B input status is missing on the mimic panel.
Product:
PowerLogic P7 Relay
Environment:
Relay configured with an Open Delta PT scheme and local HMI mimic panel enabled.
Cause:
The mimic configuration was not properly updated to reflect the PT scheme and input status, causing the local HMI to show incomplete or incorrect data.
Resolution:
Update the mimic configuration to ensure the local HMI is properly animated. Below are the recommended settings and layout adjustments:
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.