Cannot Open EPZ Relay Configuration File in eSetup Easergy Pro
Issue
A relay EPZ configuration file cannot be opened in eSetup Easergy Pro, even when using the latest available version (at this time v4.11.2). A warning message appears when attempting to open the file.
Product
- eSetup Easergy Pro Software
- Supported Powerlogic relays
Environment
- eSetup Easergy Pro v4.11.2
- Windows PC
- Local relay configuration files
- Software configured with custom or default file paths
Cause
eSetup Easergy Pro was not configured to point to the correct Template (configuration) folder. Specifically, the Template folder under General > Files & Folders was not set to the Configs directory where relay configuration files are stored. As a result, the software could not locate or open the configuration files, even though they were valid.
Resolution
The software configuration needs to be reviewed and corrected. To resolve the issue:
- Open eSetup Easergy Pro.
- Go to General > Files & Folders.
- Set the Template folder to point to the Configs directory (according to the local installation path).
- Apply the changes and retry opening the relay configuration file.
After updating the Template folder path to the correct Configs directory, you will be able to successfully open the EPZ relay configuration files.
Please check the next screenshoot:
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.