Hello,
The CONEXT SW+ would have been overloaded and got too hot and just shut down. There is no documentation for the F0 fault but it appeared before at other sites that may have been due to overload.
We suggest you to check the possibility of over loading on CONEXT SW+ and try to reduce the load. You can allow some time for the inverter to cool down and restart again.
The CONEXT SW+ would have been overloaded and got too hot and just shut down. There is no documentation for the F0 fault but it appeared before at other sites that may have been due to overload.
We suggest you to check the possibility of over loading on CONEXT SW+ and try to reduce the load. You can allow some time for the inverter to cool down and restart again.
Опубликовано для: Schneider Electric Казахстан
Нужна помощь?
Инструмент для подбора продукции
Быстро и легко находите подходящие продукты и принадлежности для ваших условий применения.
Получить коммерческое предложение
Заполните заявку онлайн, и с вами свяжется наш эксперт.
Где купить?
Легко находите ближайшего к вам дистрибьютора Schneider Electric.
Центр поддержки
Находите ресурсы поддержки для всех ваших потребностей в одном месте.
