Why does EcoStruxure Control Expert v16.2 use the predefined custom path by default ?
1. Issue
Starting from Control Expert v16.2, the predefined custom path is used for operations such as Open, Save and Export, because the “Use defined custom path” option is enabled by default.
This feature, available under Tools → Options → Paths, was introduced to ensure consistency and prevent accidental saves in unintended directories.
In previous versions (16.0 and 15.x), this option was not functioning as intended, and the software always used the last opened path instead.
2. Product Line
EcoStruxure Control Expert v16.2.
3. Resolution
To restore the previous behavior (using the last opened path):
- Go to Tools → Options → Paths.
- Uncheck “Use defined custom path.”
Keeping the option checked ensures the software always uses the predefined custom path.
Опубликовано для: Schneider Electric Казахстан
Нужна помощь?
Инструмент для подбора продукции
Быстро и легко находите подходящие продукты и принадлежности для ваших условий применения.
Получить коммерческое предложение
Заполните заявку онлайн, и с вами свяжется наш эксперт.
Где купить?
Легко находите ближайшего к вам дистрибьютора Schneider Electric.
Центр поддержки
Находите ресурсы поддержки для всех ваших потребностей в одном месте.