Is there a way to Freewheel Stop on Profinet with Process Drives?
Issue:
How can you do a freewheel stop on the ATV630 and ATV930 over Profinet command?
Product Line:
ATV630, ATV930 Series with Profinet option card.
Environment:
All
Cause:
Want the drive to freewheel stop when command is coming from the Profinet network.
Resolution:
CMD or command bits 0 and 1 both have set to 0 at the same time to command a freewheel stop over the Profinet network.
How can you do a freewheel stop on the ATV630 and ATV930 over Profinet command?
Product Line:
ATV630, ATV930 Series with Profinet option card.
Environment:
All
Cause:
Want the drive to freewheel stop when command is coming from the Profinet network.
Resolution:
CMD or command bits 0 and 1 both have set to 0 at the same time to command a freewheel stop over the Profinet network.
Released for: Schneider Electric Macedonia
Need help?
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.