Issue:
ATV630 drives embedded Ethernet in I/O profile mode set up fault reset over network.
Product Line:
ATV630 or ATV930 in I/O Profile mode only
Environment:
All
Cause:
Wants to reset the faults over Ethernet using Bit 1 of the command word CMD.
Resolution:
With Profile set to I/O the assignment for fault reset will be C501 as fault reset being Bit 1 of the CMD with embedded Ethernet and I/O profile.
C501 means Bit 1 of the CMD 8501 will allow the faults to be reset over the embedded Ethernet network.
ATV630 drives embedded Ethernet in I/O profile mode set up fault reset over network.
Product Line:
ATV630 or ATV930 in I/O Profile mode only
Environment:
All
Cause:
Wants to reset the faults over Ethernet using Bit 1 of the command word CMD.
Resolution:
With Profile set to I/O the assignment for fault reset will be C501 as fault reset being Bit 1 of the CMD with embedded Ethernet and I/O profile.
C501 means Bit 1 of the CMD 8501 will allow the faults to be reset over the embedded Ethernet network.
Released for: Schneider Electric Malaysia
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
