What to do if a message with ID 0x1450, 0x1451, 0x1452, 0x1453, 0x1454, 0x1455, 0x1456, 0x1457, 0x1458, or 0x1459 is displayed on the MicroLogic X screen. | Schneider Electric Malaysia

{}

0 item count of documents is

My Products Item count in basket is 0 My Documents Item count in basket is 0

Support

Search FAQs

FA376925

Search FAQs

What to do if a message with ID 0x1450, 0x1451, 0x1452, 0x1453, 0x1454, 0x1455, 0x1456, 0x1457, 0x1458, or 0x1459 is displayed on the MicroLogic X screen.

These messages are generated by the Opening/Closing Monitoring function of the MicroLogic X control unit, to indicate that a predefined number of operations of the MCH gear motor or one of the voltage releases (MN, XF, MX1, or MX2) is reached.

Refer to the MicroLogic X User Guide:

For information about the Opening/Closing Monitoring function and recommended actions.
For information about how to acknowledge a message on the MicroLogic X screen

Released for:Schneider Electric Malaysia

Published on:04/12/2019Last Modified on:29/09/2021

Range:

MasterPact MTZ

Range:

MasterPact MTZ