When using the SMS feature on M221 controllers with the new model (HW1103B4) of the SR2MOD03 modem (connector 15 pins), the following error codes could be returned when receiving a SMS
%SEND_RECV_SMSi.CommError=255
%SEND_RECV_SMSi.OperError=17
Error code meaning:
| 17 (00000011 hex) | MessageNotMatching | The received message does not match with any message in the command list. Issued only if the sender phone number matches an entry in the list of approved numbers (whitelist). |
This comes from a limitation of the new model (HW1103B4) of the SR2MOD03 modem.
Indeed when using this model, if the length of the received SMS is higher than 20 characters then the message is cut and so it no longer matches with the defined message in the command list.
This issue appears due to the usage of the following AT commands in the init command:
CNMI=0,2,0,0,0 : SMS-DELIVER are routed directly to the equipement
CMGF=0 : PDU Mode
NOTE:
This limitation is not observed with M241/251 and M262 controllers as they work in Text Mode (CMGF=1).
M221 doesn’t support Text Mode. Only PDU Mode (CMGF=0) is supported.
Released for: Schneider Electric Malaysia
When using the SMS feature on M221 controllers with the new model (HW1103B4) of the SR2MOD03 modem (connector 15 pins), the following error codes could be returned when receiving a SMS
%SEND_RECV_SMSi.CommError=255
%SEND_RECV_SMSi.OperError=17
Error code meaning:
|
17 (00000011 hex) |
MessageNotMatching |
The received message does not match with any message in the command list. Issued only if the sender phone number matches an entry in the list of approved numbers (whitelist). |
This comes from a limitation of the new model (HW1103B4) of the SR2MOD03 modem.
Indeed when using this model, if the length of the received SMS is higher than 20 characters then the message is cut and so it no longer matches with the defined message in the command list.
This issue appears due to the usage of the following AT commands in the init command:
CNMI=0,2,0,0,0 : SMS-DELIVER are routed directly to the equipement
CMGF=0 : PDU Mode
NOTE:
This limitation is not observed with M241/251 and M262 controllers as they work in Text Mode (CMGF=1).
M221 doesn’t support Text Mode. Only PDU Mode (CMGF=0) is supported.
Released for: Schneider Electric Malaysia
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
1.什么是楼宇管理系统/楼宇自动化系统？
楼宇管理系统(BMS)有时也称为楼宇自动化系统(BAS)，是安全、高效、可靠地运营楼宇的关键工具。由软件和硬件组成，BMS控制并监控楼宇的机械和电气设备，如电力系统、暖通空调(HVAC)、照明、消防和安全系统。
2.楼宇管理系统如何变化？
随着企业专注于能效和可持续性，租户需求和期望也发生了根本变化。这些趋势极大地影响了传统BMS的实施，推动其发展和改进。与此同时，云计算、物联网、分析和人工智能领域的进步正在带来新的、更广泛的能力。随着这些技术成为底层技术，新一代楼宇管理系统现在成为涵盖多个业务和运营技术(OT)系统和传感器的楼宇所有数据的集成和聚合工具。通过相互协同管理和控制楼宇的所有OT，可以最大限度地提高能源和运营效率，同时提高用户的生产力和幸福感。
3.什么是智能楼宇管理系统？
智能楼宇管理系统是集成楼宇、业务、设备物联网数据和特定细分市场专业系统（如医院空气质量监控或酒店客房预订系统）的平台。BMS的最终目的是从数据中提取价值，以安全、可靠、高效地运行和维护楼宇系统，同时最大限度提高用户的工作效率和幸福感。与传统BMS系统相比，新一代系统的范围和功能要广得多。它们也更易于使用、编程、扩展和更新。新一代BMS现代化实施涵盖从设备传感器到楼宇控制器，再到带有应用和服务的云端。新一代系统可从任何位置访问，支持知识报告、分析/人工智能应用、预测性维护，并能够自我诊断。