How do I perform a manual runtime battery calibration on my Easy-UPS?
Product Line:
Easy-UPS
Environment:
All models, All Serial Numbers
Cause:
Occasionally you may find that the runtime being reported by your Easy-UPS and the runtime expected are different. Running a Battery Calibration may help.
Resolution:
During normal operation, your Smart-UPS will display an estimated runtime via the software, network management card, or LCD screen. This runtime will vary depending on the load attached, the battery charge, and the age of the batteries. Performing a calibration forces the UPS on battery, drains the battery down, and charges it back up. This "teaches" the UPS what the true runtime available is. Draining the battery and recharging puts some wear and tear on the battery system and is not recommended unless there is a specific issue you are trying to address. Please keep in mind that the runtime reported while the UPS is online is only an estimate. The runtime reported when the UPS is on battery power is more accurate. Due to increased wear and tear on the battery we recommend performing a calibration no more than once every 6 months (if needed).
- Stop the Power Chute software from running and disconnect the serial, USB, or Ethernet cable(s).
- There must be at least a 30% load attached to the UPS during this procedure, and this load cannot fluctuate more than +/- 5%. THIS IS IMPORTANT
- Attach a non-critical load to the UPS and then force the UPS on battery by disconnecting it from utility power.
- Allow the unit to run on battery until it turns off completely. The load attached to the UPS will drop.
- If the Load is not at least 30% or if the calibration is ended before the UPS drops the load, the calibration will not work.
- Plug the UPS back into the wall outlet and allow it to recharge (preferably turned off)
Released for: Schneider Electric Malaysia
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
什么是信息安全解决方案和服务？
信息安全解决方案和服务包括旨在降低IT和OT网络风险、保护数据免受未经授权访问、网络攻击和破坏的广泛措施。这一综合方法包括威胁监控、事件响应、安全评估、渗透测试、安全意识培训和全球合规性等，涵盖人员、流程和技术。通过利用施耐德电气的信息安全解决方案和服务，组织能够有效地降低其数字资产的风险敞口，并确保其数据的机密性、完整性和可用性。在当今互联世界中，网络威胁不断演进，这些解决方案和服务在帮助企业降低风险和维护安全数字环境方面起着关键作用。
什么是信息安全解决方案和服务？
我们的信息安全解决方案和服务框架由五个关键部分组成，旨在显着增强您的企业的信息安全态势。这些部分包括安全咨询、设计和实施、监控、维护和培训。我们专门定制的信息安全解决方案和服务旨在确保政策和程序管理合规性、资产清单、差距分析、深度防护、安全架构、资产管理、系统加固和解决方案集成。这些解决方案和服务的核心是设备和威胁管理、防火墙安全、OT SIEM支持以及OT安全服务。通过实施系统升级、安全补丁和事件响应，施耐德电气使您的企业能够主动维护安全，同时提高安全意识，为安全工程师和管理员提供培训，提升您团队的专业技能。
为什么合理管理的安全服务治理和遵守全球标准对您的业务有帮助？
适当管理的安全服务治理和遵守全球标准对您的业务至关重要，因为它们为降低安全风险、确保法规遵从性、保护敏感数据以及加强客户和利益相关方之间的总体信任和信心提供了一个强有力的框架。它还表明您致力于维护高安全标准，这将成为您在市场中的竞争优势。