Issue
How to activate licenses after installing Power Monitoring Expert (PME) and Event Notification Module (ENM)

Product Line
PME 7.2
PME 8.x
PME 9.x
PME 2020
Event Notification Module 8.3.x

Environment
Floating License Manager
License Manager

Cause
A user may not know where to find information that describes the license activation process for PME or ENM

Resolution
PME and ENM licenses can be activated using both online and offline methods.

Please find "PME Licensing Guide v1.6.pdf" attached at the bottom of this article, which outlines the following contents:

• Introduction
• PME Trial License
• Activating Licenses
  • Online activation (preferred method)
  • Offline activation
• Appendix A: Key terms
• Appendix B: Licensing Considerations
  • Client licensing
  • Licensing when reinstalling PME
  • PME and PowerSCADA Expert (PSE) on the same machine
• Appendix C: Troubleshooting
  • Untrusted licenses
  • License Manager settings
  • Management Console
  • Registration popup
  • Enterprise License server port
• Appendix D: Removing the Trial License

The procedures for the license activation methods can also be found in the "Help" section of the "Schneider Electric Floating License Manager" in the "Activation Methods" Section:




Also, there are 4 videos below that outline the Activation/Return process for both Web and Web Portal methods.


Activating Power Monitoring Expert Licenses by Web:




Activating Power Monitoring Expert Licenses while offline:




Returning Power Monitoring Expert Licenses by Web:




Returning Power Monitoring Expert Licenses while offline:




To Remove the PME Trial License:

Released for:Schneider Electric Nigeria