Issue:
Getting NST on my ATV320 when wiring a relay to the digital output (DQ).
Product Line:
Altivar 320
Environment:
All
Cause:
NST on the ATV320 with relay connected
Resolution:
1. Check to make sure your relay is wired correctly in series with the digital output:
Getting NST on my ATV320 when wiring a relay to the digital output (DQ).
Product Line:
Altivar 320
Environment:
All
Cause:
NST on the ATV320 with relay connected
Resolution:
1. Check to make sure your relay is wired correctly in series with the digital output:
Jumper +24V to DQ+
Wire your + side of your relay coil to DQ-
Wire the other side of the coil to COM
Wire your + side of your relay coil to DQ-
Wire the other side of the coil to COM
2. Measure the amperage pull of your relay. The digital output and the drive's +24V supply each have a maximum 100mA capacity.
If your relay is pulling more than 100mA, it's pulling down the +24V in the drive and causing the NST.
See attachment.
See attachment.
Released for: Schneider Electric Nigeria
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.
