How Do I Request a Warranty Replacement for My APC Smart-UPS or APC Back-UPS, and Do I Need to Return the Defective Unit?
Issue:
I have an APC Smart-UPS or APC Back-UPS that is not working properly, and may still be under warranty. I would like to know how the warranty replacement process works, whether I need to return the defective unit, and what to do if my product was purchased in one country but is being used in another.
Product Line
- APC Smart-UPS
- APC Back-UPS
Environment
All APC Smart-UPS and APC Back-UPS products covered by a valid factory warranty.
Cause
Customers require guidance on the warranty replacement process, return requirements, regional differences, and cross-border warranty scenarios.
Resolution
Step 1: Contact Technical Support
Before a warranty replacement can be approved, Technical Support must review the issue and perform troubleshooting.
Contact Schneider Electric Customer Support through the official support channels available in your country or region.
Important: Warranty processes may vary depending on product type, country of purchase, country of installation, and local logistics requirements.
Step 2: Complete Troubleshooting
Troubleshooting is required to verify the issue before warranty service can be provided.
A Schneider Electric Technical Support Engineer will:
- Verify warranty eligibility.
- Review the reported issue.
- Perform troubleshooting.
- Determine whether a replacement is required.
Not all reported issues require product replacement.
Step 3: Keep the Defective Product
⚠️ Do not discard, recycle, or dispose of the defective product unless you have received explicit instructions that it is no longer required.
Some warranty programs require the defective unit to be:
- Returned to a service center.
- Collected by a carrier.
- Exchanged during delivery of the replacement unit.
- Verified as part of the warranty process.
Disposing of the defective product before receiving instructions may impact the warranty replacement process.
Step 4: If a Replacement Is Approved
If Technical Support determines that the product qualifies for warranty replacement, a replacement order will be created, and instructions will be provided based on the warranty process applicable to your location.
Depending on the country or region, the process may include:
- Advance replacement.
- Return-to-service-center process.
- Collection of the defective unit.
- One-for-one exchange at delivery.
- Other country-specific warranty procedures.
Return requirements vary by country, region, and product family.
Will a Return Shipping Label Be Provided?
Return and collection methods vary by country and region.
Where applicable, return instructions may include:
- A carrier collection arrangement.
- Return shipping documentation.
- Return authorization instructions.
- A shipping label.
- Other logistics instructions.
Your Schneider Electric Technical Support Engineer will provide the instructions applicable to your warranty claim.
Products Purchased in One Country and Used in Another
If your product was purchased in one country but is currently being used in another country, warranty support may follow a different process than a standard local warranty claim.
Factors relevant to warranty handling include:
- Country of purchase.
- Country of installation or use.
- Product model and regional specifications.
- Local stock availability.
- Applicable warranty policies.
It is recommended you contact Schneider Electric Technical Support in the country the UPS is installed in. The appropriate support organization will review the case and provide guidance based on the product and location.
Do not dispose of the product while the warranty claim is under review.
Exchange-Based Warranty Programs
Some warranty replacements are processed using an exchange program.
In these situations:
- A replacement unit is arranged.
- The defective unit must be available for return or collection.
- Collection may occur at the same time the replacement unit is delivered, or at a later time.
- Failure to provide the defective unit when required may delay or prevent completion of the replacement process.
Your Schneider Electric Technical Support Engineer will advise whether your replacement is subject to an exchange program.
Additional Information for Customers in the United States and Canada
For customers located in the United States and Canada:
- If a warranty replacement is approved, an RMA (Return Merchandise Authorization) number will be issued.
- Replacement units typically ship through carriers such as FedEx, UPS, or Purolator.
- Products covered by an Extended Warranty may be shipped using standard overnight delivery.
- RMA requests processed before 2:00 PM local time may ship the same day, subject to product availability.
- Within 30 days of purchase, replacement units are generally provided as new products.
- After 30 days, replacement units may be refurbished products.
- New products may be provided if refurbished replacements are not available.
- All refurbished replacement products are tested to ensure they meet factory specifications and include a new battery.
The United States and Canada replacement process may differ from the warranty process used in other countries and regions.
Preparing a Unit for Return
If instructed to return the product:
- Follow all instructions provided by Technical Support.
- Disconnect the battery if required by the return instructions.
- Package the unit securely, preferably using the original packaging.
- Clearly mark the package with the RMA number provided.
- Follow the carrier or collection instructions provided for your case.
Need Additional Assistance?
For faster assistance, have the following information available when contacting Schneider Electric Technical Support:
- Product model and serial number
- Case number (if one has already been created)
- RMA number (if applicable)
References
- Contact Support: https://www.se.com/support/
- APC Product Information: https://www.apc.com
- UPS Factory Warranty Information: https://www.apc.com/us/en/support/product-support/ups-factory-warranty-information.jsp
Released for: Schneider Electric Philippines
