Symmetra Power Array redundancy alarm is limited to N+2

Search FAQs

Issue

Symmetra Power Array has a maximum redundancy alarm limit of N+2. The user cannot set this alarm to a value greater than 2. This means that if the user

Product Line

Symmetra Power Array

Environment

All serial ranges

Cause

The system is unable to support a value greater than 2 for the user configurable redundancy alarm.

Resolution

The system is not capable of this function.

Please Note: The Symmetra can report on current redundancy levels greater than N+2, such as via the PowerView Status menu or Network Management Card, etc. The system is simply not capable of alarming when the redundancy limit falls below N+3. This is not considered a typical use case anyway.