Issue:
There is a request for the perforation pattern percentage information for NetShelter cabinets.
Product Line:
NetShelter SX, SV and VX
Environment:
All versions and serial ranges.
Cause:
Some equipment manufacturers may request minimum perforation pattern percentages for the front and rear doors of an enclosure which houses their equipment. The most updated specifications can always be found in the owners manual of the enclosures in question.
NOTE: the perforation pattern percent of the equipment itself should be at least as open as the equipment demands of the enclosure doors.
Resolution:
see attached file.
There is also information in the NetShelter SX Bid Specifications document on the APC website.
There is a request for the perforation pattern percentage information for NetShelter cabinets.
Product Line:
NetShelter SX, SV and VX
Environment:
All versions and serial ranges.
Cause:
Some equipment manufacturers may request minimum perforation pattern percentages for the front and rear doors of an enclosure which houses their equipment. The most updated specifications can always be found in the owners manual of the enclosures in question.
NOTE: the perforation pattern percent of the equipment itself should be at least as open as the equipment demands of the enclosure doors.
Resolution:
see attached file.
There is also information in the NetShelter SX Bid Specifications document on the APC website.
Released for: Schneider Electric Philippines
Need help?
Start here!
Find answers now. Search for a solution on your own, or connect with one of our experts.
Contact Support
Reach out to our customer care team to receive more information, technical support, assistance with complaints and more.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Search FAQs
Search topic-related frequently asked questions to find answers you need.
Contact Sales
Start your sales inquiry online and an expert will connect with you.
