What causes an Err 7 fault code in an ATV31 drive?
Issue:
Err 7 fault code in ATV31 drive
Product Line:
ATV31, All models, All serial numbers
Environment:
All
Resolution:
Possible cause of Err7 on the ATV31 remote display:
1). Baud rate not equal to 19.2 kb/sec - Set to 19.2 in the COn Menu parameter tbr
2). Format is not equal to 8bits even parity 1 stop bit (8E1) - Set to 8E1 in the COn Menu parameter tFO
3). Defective cabling or connection between the VFD and keypad - change the cabling
4). Defective keypad - replace the keypad
5). Shorted pins on the comport of the VFD - If no physical short on the pins in the comport then the issue is internal to VFD, replace VFD
Released for: Schneider Electric Philippines
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.