Is it possible to program a new M340 out of the box via the serial port?
Title
Program a new M340 out of the box via the serial port
Issue
Loading intial program into M340
Product Line
M340
Environment
Unity Pro, Control Expert
Resolution
Yes. By default without a program loaded the serial port of the M340 is set to RS485, Slave mode, 9600, 8, E, 1 and Address#1.
Using the TSXCUSB485 RS485 to USB adapter with a standard Ethernet patch cable connected to the M340 serial port you will be able to connect with Unity Pro to download a project.
**The position of the rotary switch must be set to #0= TER MULTI or #1= OTHER MULTI **
Program a new M340 out of the box via the serial port
Issue
Loading intial program into M340
Product Line
M340
Environment
Unity Pro, Control Expert
Resolution
Yes. By default without a program loaded the serial port of the M340 is set to RS485, Slave mode, 9600, 8, E, 1 and Address#1.
Using the TSXCUSB485 RS485 to USB adapter with a standard Ethernet patch cable connected to the M340 serial port you will be able to connect with Unity Pro to download a project.
**The position of the rotary switch must be set to #0= TER MULTI or #1= OTHER MULTI **
Released for: Schneider Electric Philippines
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.