CONEXT SW+ inverter shows 'F0 is too hot and has shut down. See guide', Please suggest a solution?
Hello,
The CONEXT SW+ would have been overloaded and got too hot and just shut down. There is no documentation for the F0 fault but it appeared before at other sites that may have been due to overload.
We suggest you to check the possibility of over loading on CONEXT SW+ and try to reduce the load. You can allow some time for the inverter to cool down and restart again.
The CONEXT SW+ would have been overloaded and got too hot and just shut down. There is no documentation for the F0 fault but it appeared before at other sites that may have been due to overload.
We suggest you to check the possibility of over loading on CONEXT SW+ and try to reduce the load. You can allow some time for the inverter to cool down and restart again.
Released for: Schneider Electric Philippines
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.