Cut Gas Flow to 108D10C and 108D90C Cut off gas flow in less than 0.1 seconds with an ASCO 173A19 Emergency Stop Station featuring a momentary push button. Instal these in multiple stations located around the facility or classroom for safety and emergency purposes. Applicable to both 108D10C and 108D90C.

Monitor Backup Generator Start Signals and Prevent Outages An NEC®-compliant engine-generator starts automatically when it receives a start signal from an automatic transfer switch. If signalling wires are damaged, an engine will not receive the start signal needed to begin supplying mission-critical power. Without Engine Start Circuit monitoring and control, facility operators will never know when wiring is compromised, placing the facility at risk of an outage.

Remotely Monitor and Control ASCO Transfer Switches The ASCO Quad-Ethernet Module, catalogue no. 5140 (Acc 72EE), provides connectivity from ASCO equipment and Ethernet switch functionality.

Remotely Monitor and Control ASCO Transfer Switches The ASCO Connectivity Module, catalogue no. 5150 (Acc 72E), provides easy and reliable Ethernet connectivity to ASCO transfer switches for monitoring.

Remotely Monitor and Control ASCO Transfer Switches The ASCO 5170 Quad-Ethernet Module is the optimal path to remotely monitor, control and connect to your ASCO Power Transfer Switches.

Providing Deeper Transparency into the Workings of an Electrical Circuit The 5210 Digital Power Meter (DPM) is ASCO's standard solution for providing deeper transparency into the happenings in an electrical circuit.

Remote Transfer Switch Interface Control of a Single Switch The ASCO 5350 Remote Annunciator is a remote transfer switch interface for LED indication and control of a single transfer switch. Ethernet technology is incorporated for fast, reliable communications. Multiple annunciators​overseeing the same transfer switch can be placed in different locations, allowing redundant, distributed monitoring and control.

Status and Control for up to Eight Transfer Switches The ASCO 5350 Remote Annunciator (RA) is a stand-alone, industrial-grade interface device that provides transfer switch status indication and transfer/retransfer control for up to eight transfer switches. Ethernet technology is incorporated for fast, reliable communication.

Centralised Monitoring of Critical Power Equipment The ASCO 5701 Eight-Device Gateway provides centralised monitoring of critical power equipment through a facility's Transfer Switch. The 5701 Gateway connects directly to a facility's generator, transfer switch, load bank, surge monitoring system and other equipment. From this central point of access, users can securely view web pages and initiate transfer tests.

Facility Power Management in a Box Centralises power testing, monitoring and reporting while delivering aggregated power information to facility monitoring systems via standard open protocols.

Consolidates Annunciators for up to Eight Devices into a Single, Wall-Mountable Touchscreen Interface Managing critical power equipment can be challenging. Multiple annunciators utilise different interfaces. Generators and transfer switches require local operation for testing. Compliance requires manual data collection and labour-intensive reporting.

Automatically Supervise ATS Transfers to the Emergency Sources When real-time demand exceeds generator capacity, loads must be connected or disconnected according to load priority to avoid generator overload. ASCO's 5800 SERIES Load Management Units automatically supervise ATS transfers to the emergency source according to assigned priorities. These units optimise capacity usage while avoiding overload.

Standard and Custom Lighting Solutions for Area and Security Applications Our standard and custom lighting control panels are designed to meet all lighting control application needs. ASCO 641 Lighting Control Panels are designed for automatic and manual on/off control of car park lighting, signs, building exterior lights, security lighting, interior safety lighting and recreational lighting areas.