Main rangeTeSys product nameTeSys T device short nameLTMR product or component typeMotor controller device applicationEquipment monitoring and control measurement current0.4…8 A [Us] rated supply voltage100...240 V AC 50/60 Hz current consumption8...62.8 mA supply voltage limits93.5…264 V AC communication port protocolProfibus DP bus typeProfibus DP polarised 2-wire RS485 interface, addressing 1...125, transmission rate 9.6 kbit/s...12 Mbit/s, SUB-D 9 with 2 shielded twisted pairs, type AProfibus DP polarised 2-wire RS485 interface, addressing 1...125, transmission rate 9.6 kbit/s...12 Mbit/s, terminal block with 2 shielded twisted pairs, type A Complementary [Ui] rated insulation voltage690 V conforming to EN/IEC 60947-1690 V conforming to CSA C22.2 No 14690 V conforming to UL 508 [Uimp] rated impulse withstand voltage4 kV supply, inputs and outputs conforming to EN/IEC 60947-4-16 kV current or voltage measurement circuit conforming to EN/IEC 60947-4-10.8 kV communication circuit conforming to EN/IEC 60947-4-1 short-circuit withstand100 kA conforming to EN/IEC 60947-4-1 associated fuse rating4 A gG for output0.5 A gG for control circuit protection typeLocked rotorOverloadPhase unbalancePhase failureEarth-leakage protectionReverse polarity protectionLoad fluctuationThermal protectionPower factor variationThermal overload protectionOverload (long time) network and machine diagnosis typePhase fault and earth fault trip countersTrip history informationStarting current and timeFault recordingWaiting time after overload trippingEvent recordingMotor control command recordingRunning hours counter/operating timeTrip context informationRemaining operating time before overload tripping logic input number6 input current3.1 mA at 100 V7.5 mA at 240 V current state 0 guaranteedLogic input: 0...40 V and <= 15 mA for 25 ms current state 1 guaranteedLogic input: 79...264 V and >= 2 mA for 25 ms maximum output switching frequency2 Hz load current5 A at 250 V AC for logic output5 A at 30 V DC for logic output permissible power480 VA (AC-15), Ie = 2 A, 500000 cycles (output)30 W (DC-13), Ie = 1.25 A, 500000 cycles (output) maximum operating rate1800 cyc/h contacts type and composition1 NO + 1 NC fault signal3 NO metering typeAverage current IavgEarth-fault currentTemperatureImbalance currentPhase current I1, I2, I3 RMS measurement accuracy5...15 % earth fault current internal measurement (for current > 0.1 A)1 % voltage (100...830 V)3 % power factor (cos φ > 0.6)5 % earth fault current external measurement (< 5 % or 0.01 A)+/- 30 min/year internal clock0,02 temperature1 % current5 % active and reactive power overvoltage categoryIII connection pitch5.08 mm connections - terminalsControl circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible with cable endControl circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) flexible without cable endControl circuit: connector 1 cable(s) 0.25…2.5 mm² (AWG 24...AWG 14) flexible without cable endControl circuit: connector 1 cable(s) 0.2…2.5 mm² (AWG 24...AWG 14) solid without cable endControl circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) flexible with cable endControl circuit: connector 2 cable(s) 0.2…1.5 mm² (AWG 24...AWG 14) flexible without cable endControl circuit: connector 2 cable(s) 0.5…1.5 mm² (AWG 24...AWG 14) flexible without cable endControl circuit: connector 2 cable(s) 0.2…1 mm² (AWG 24...AWG 14) solid without cable end tightening torqueControl circuit: 0.5…0.6 N.m flat screwdriver 3 mm pollution degree3 electromagnetic compatibilityElectrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2Radiated RF fields, 3, 10 V/m, conforming to EN/IEC 61000-4-3Fast transients immunity test (other circuits), level 3, 2 kV, conforming to EN/IEC 61000-4-4Fast transients immunity test (on supply and relay outputs), level 4, 4 kV, conforming to EN/IEC 61000-4-4Voltage dips and interruptions immunity test, 70 %, 500 ms, conforming to EN/IEC 61000-4-11Conducted RF disturbances, 10 V, conforming to EN/IEC 61000-4-6Temperature sensor: surges (serial mode), 0.5 kV, conforming to EN/IEC 61000-4-5Temperature sensor: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5Control circuit: surges (serial mode), 1 kV, conforming to EN/IEC 61000-4-5Communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5Relay outputs and supply: surges (serial mode), 2 kV, conforming to EN/IEC 61000-4-5Relay outputs and supply: surges (common mode), 4 kV, conforming to EN/IEC 61000-4-5Control circuit: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 width91 mm height61 mm depth122.5 mm net weight0.53 kg web servicesWeb server compatibility codeLTMR Environment standardsUL 508IEC 60947-4-1EN 60947-4-1IACS E10CSA C22.2 No 14 product certificationsCSAC-TickULCCCLROS (Lloyds register of shipping)NOMABSGLEACBVDNVRINARMRoSATEXKERI protective treatment12 x 24 hour cycles conforming to EN/IEC 60068-2-3048 h conforming to EN/IEC 60070-2-11TH conforming to EN/IEC 60068 fire resistance650 °C conforming to EN/IEC 60695-2-12960 °C conforming to UL 94 ambient air temperature for operation-20…60 °C ambient air temperature for storage-40…80 °C operating altitude<= 2000 m without derating mechanical robustnessVibrations mounted on symmetrical rail: 1 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6Vibrations plate mounted: 4 Gn, 5...300 Hz conforming to EN/IEC 60068-2-6Shocks half sine wave acceleration: 15 Gn for 11 ms conforming to EN/IEC 60068-2-27 IP degree of protectionIP20 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectiveCompliant
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS RegulationChina RoHS declaration
Product out of China RoHS scope. Substance declaration for your information
Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsSize pdfSize 111.5 MBDate 12/07/19DescriptionReady-to-use motor starters and all components for builiding specific motor starters ( ircuit breakers, contactors, overload relays , accessories ...).The catalogue can also be downloaded chapter per chapter.User guideFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages20
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.