Main range of productPreventa Safety detection product or component typeSafety module safety module nameXPSCM safety module applicationFor monitoring of single beam photo-electric sensor function of moduleBuilt-in muting safety levelCan reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1 safety reliability dataMTTFd = 16.6 years conforming to EN/ISO 13849-1DC = 95.5 % conforming to EN/ISO 13849-1PFH = 3.12E-7 1/h conforming to EN/IEC 61508PFHd = 3.12E-7 1/h conforming to EN/IEC 62061 number of inputs2 (terminal(s) MA, MB) for muting function4 (terminal(s) Z1, Z2, Z3, Z4) for sensor input voltage24 V DC for sensor24 V DC (terminal(s) U+, U-) for muting function input compatibilityXC limit switch for muting functionXU2M18PP340... for muting functionXU2S18PP340... (infrared) for sensorXU9M18PP340... for muting function connections - terminalsCaptive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid or flexible without cable endCaptive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezelCaptive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezelCaptive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid or flexible without cable endCaptive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezelCaptive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel output typeRelay 2 NO (13-14, 23-24), volt-free number of additional circuits0 [Us] rated supply voltage24 V DC - 20...20 % Complementary sensor power supplyU+, U-: 24 V DC maximum supply current for sensors200 mA input current200 mA for muting function synchronisation time between inputs3 s (+/- 20 %) for the activation of the MA/MB muting signal muting maximum duration60 s (- 10...30 %) maximum line resistance10 Ohm for sensor power supply breaking capacity180 VA holding AC-15 C300 relay output1800 VA inrush AC-15 C300 relay output breaking capacity20 mA at 24 V for solid state output1.5 A at 24 V (DC-13) time constant: 50 ms for relay output associated fuse rating4 A gG for relay output conforming to DIN VDE 0660 part 2004 A gG for relay output conforming to EN/IEC 60947-5-16 A fast blow for relay output conforming to DIN VDE 0660 part 2006 A fast blow for relay output conforming to EN/IEC 60947-5-1 minimum output current10 mA for relay output minimum output voltage17 V for relay output maximum response time on input open25 ms local signalling1 LED, function electronic internal fuse status1 LED, function restarting1 LED, function safety outputs closed1 LED, function safety outputs open1 incandescent lamp, function muting power consumption: 4…6.5 W output thermal current5.6 A per relay11 A maximum maximum power consumption in W15 W protection typeElectronic internal fuse [Ui] rated insulation voltage300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2300 V (pollution degree 2) conforming to EN/IEC 60947-5-1 [Uimp] rated impulse withstand voltage4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 24 kV overvoltage category III conforming to EN/IEC 60947-5-1 Environment ambient air temperature for operation-10…55 °C ambient air temperature for storage-25…85 °C IP degree of protectionIP20 (terminals) conforming to IEC 60529IP40 (enclosure) conforming to IEC 60529 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for XPSCM1144: module XPS-CM - single-beam photo-electric sensors - 24 V DC (Version 1.0)CertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.