Issue:
Customers need to make sure that the NetShelter CX is not running too hot.
Product Line:
NetShelter CX
Environment:
All versions and serial ranges.
Cause:
Need to know internal temperature of the cabinet.
Resolution:
As long as the power guidelines are followed the internal temperature should be no more than 5 deg C (41*F) over room temperature.
Avoid clustering heat generating devices such as servers, dense RAID arrays and large VoIP switches in one part of the rack.
Distribute the thermal load evenly up and down the cabinet such that each fan module supports an equal amount of the thermal load, or as close to it as possible.
Blanking panels may be used to prevent air passing through large gaps between individual pieces of equipment.
Also refer to the installation manual for guidance.
Customers need to make sure that the NetShelter CX is not running too hot.
Product Line:
NetShelter CX
Environment:
All versions and serial ranges.
Cause:
Need to know internal temperature of the cabinet.
Resolution:
As long as the power guidelines are followed the internal temperature should be no more than 5 deg C (41*F) over room temperature.
Avoid clustering heat generating devices such as servers, dense RAID arrays and large VoIP switches in one part of the rack.
Distribute the thermal load evenly up and down the cabinet such that each fan module supports an equal amount of the thermal load, or as close to it as possible.
Blanking panels may be used to prevent air passing through large gaps between individual pieces of equipment.
Also refer to the installation manual for guidance.
Đã phát hành cho: Schneider Electric Việt Nam
Bạn cần trợ giúp?
Công cụ chọn sản phẩm
Nhanh chóng và dễ dàng tìm được sản phẩm và phụ kiện phù hợp cho các ứng dụng của bạn.
Nhận báo giá
Bắt đầu gửi yêu cầu bán hàng trực tuyến và chuyên gia sẽ liên hệ với bạn.
Nơi mua hàng?
Dễ dàng tìm nhà phân phối Schneider Electric gần bạn nhất.
Trung tâm Hỗ trợ
Tìm sự hỗ trợ cho mọi nhu cầu của bạn tại một nơi.
