For Prisma iPM system L, the sheet metal thicknesses are as follows:
PaK Back plate1.2 mm
PaK pillars1.5 mm
PaK Side panels1.2 mm
PaK Top / bottom panels 1.2 mm
PaK Front frame1 mm
PaK Front plates --> 1 mm
PaK Door --> 1.2 mm

Full Kit Back plate --> 1.2 mm
Full Kit pillars --> 1.5 mm
Full Kit Side panels --> 1.2 mm
Full Kit Top / bottom panels --> 1.2 mm
Full Kit Front frame --> 1 mm
Full Kit Front plates --> 1 mm
Full Kit Door --> 1.2 mm

Released for:Schneider Electric South Africa