What is the wiring diagram of serial cable to connect Vison RTU with RJ-45 based RS-232 port of ScadaPack 350 RTU ?

How can we help you today?

RJ-45 to SCADAPack Vision

This cable is used to connect from the COM3 (RJ-45-based RS-232) port on the RTU to a DE-9S connector on a SCADAPack Vision. A 1.5 m (5 ft.) long cable is available from Schneider Electric using part number TBUM297237.

RJ-45 to SCADAPack Vision cable Description

RJ-45 8 Pins	SCADAPack E Function	SCADAPack Vision Function	DE-9S
			Shield connects to shell
6	TxD	RxD	2
5	RxD	TxD	3
4	GND	GND	5
3	DTR / Test 2	ON switch	1
2	DCD / Test 1	ON switch	4
1	+5 Vdc Out	+5 Vdc In	9
7 and 8 are not connected at this end.			Wires not connected at this end.