Please note - As of 01/09/23 the Telemecanique Sensors range is no longer part of Schneider Electric. This FAQ is now for reference only. For further information and contact details for Telemecanique Sensors, please visit their website; https://www.telemecaniquesensors.com/global/en.
When the product does not have a display, we recommend using a pressure gauge to set the increasing pressure.
The pressure is adjusted by means of the adjusting screw located on top of the product. The image below shows an example of this.
The complete XML* setup manual is attached.
When the product does not have a display, we recommend using a pressure gauge to set the increasing pressure.
The pressure is adjusted by means of the adjusting screw located on top of the product. The image below shows an example of this.
The complete XML* setup manual is attached.
Released for:Schneider Electric Australia
