Why does an ATS22 controlled stop not bring the motor to a complete stop at the end of ramp time?
Issue:
ATS22 does not follow the decel ramp.
Product Line:
Altistart 22 ATS22
Environment:
All ATS22
Cause:
Ramp time is short.
Resolution:
The ATS22 cannot produce braking torque during the deceleration ramp. It can only produce driving torque. Therefore, the deceleration ramp can extend the stopping time by ramping down the driving torque. It cannot reduce the stopping time to less than a normal coast to stop.
When a braking feature is required, use a variable speed drive and consider an optional DB resistor.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.