PlantStruxure PES [V4.0]: How can I change the ports used by the system server?
Goals and Symptoms
Adjust ports used by the system server
Facts and Changes
PES version V4.0
Causes and Fixes
You can configure the port that is used by the system server for client/server connection in the System Server Configuration Wizard.
Please refer the below image for changes in the System server Configuration Wizard
Please refer the below images for changes in the Engineering client Configuration wizard
Before changing the port, run netstat -ano in a command prompt on the PC on which the system server is installed. This command lists the ports that are currently in use on the PC.
Verify that the port that you want to use is not already in use.
If you change the port from its default value (TCP port 9950), you need to configure the same value for each engineering and operation client that connects to the server by using their respective Configuration Wizard.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.