EAE25.0: Topology tab showing Blank or white screen without displaying any Hardware catalogue
This knowledge base article explains user on How to resolve an issue which is Topology tab showing Blank or white screen without displaying any Hardware catalogue in Ecostruxure Automation Expert 25.0.
Kindly ensure that the below listed services are running without any issue. If any service is not running, then try to start them. In this scenario, all services are running fine.
There is a chance that during installation MicrosoftWebview2 has not been installed properly and due to this Topology is not displaying. For resolving this issue, User need to install the latest version of MicrosoftWebview2 software. This software can be downloaded from the link https://developer.microsoft.com/en-us/microsoft-edge/webview2
After installing the Microsoft WebView2 software, restart the PC and EAE Topology starts to display all the components as normal. In case, the issue is not resolved, please contact Ecostruxure Automation Expert Support.
Publié pour: Schneider Electric Belgium
Besoin d'aide ?
Sélectionnez le bon produit
Trouvez rapidement et facilement les produits et accessoires adaptés à vos applications.
Obtenir un devis
Effectuez une demande de renseignements en ligne et un expert vous contactera.
Où acheter ?
Trouvez facilement le distributeur Schneider Electric local le plus proche.
Centre d'aide
Trouvez des ressources de support pour tous vos besoins, en un seul endroit.