Issue:
Setting OPL = NO on an ATV312
Product Line:
Altivar 312
Environment:
All
Cause:
Need to turn off OPL, possibly for testing purposes
Resolution:
OPL is an output phase loss detection. This feature is intended to protect the motor from imbalanced current or single phasing. Disabling the feature has no adverse affect on the drive; however, it should only be disabled for testing the drive without a motor connected or if drive is installed with a full voltage bypass.
Setting OPL = NO on an ATV312
Product Line:
Altivar 312
Environment:
All
Cause:
Need to turn off OPL, possibly for testing purposes
Resolution:
OPL is an output phase loss detection. This feature is intended to protect the motor from imbalanced current or single phasing. Disabling the feature has no adverse affect on the drive; however, it should only be disabled for testing the drive without a motor connected or if drive is installed with a full voltage bypass.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.
