Can I monitor a Standby unit in a Quantum Hot Standby system using SNMP?
Issue:
Can I monitor a Standby unit in a Quantum Hot Standby system using SNMP?
Product Line:
Quantum Hot Standby
Resolution:
Yes. SNMP service is active on an NOE771xx module operating in a Quantum HSBY.The last octet of the Standby address
will be offset by +1 from the Primary.. Primary address of 192.168.100.1 will result in a Standby address of 192.168.100.2
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.