How do I configure the Vijeo Designer Runtime on an iPC to use the Windows windows controls
For an iPC target, there is a "Windows Control" group of properties at the target level in Vijeo-Designer.
-Disable Key Control:
When set to "Disabled", the "key control" is available. This means that special combinations of keys from Windows are available (e.g. Alt+Tab to switch between applications, Alt+F4 to close an application, access to the Windows key).
When set to "Enabled", the "key control" is unavailable. This means that there is no way to switch from Vijeo-Designer Runtime to another Windows application.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Support | Schneider Electric Global (se.com)
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.