R037_How to configure a TesysU on Profibus with Siemens Step7
Goals and Symptoms
This document will describe you how to configure TeSysU on a network Profibus with a PLC Siemens S300 station. The CPU is a CPU 315 - 2 DP with Profibus port embedded.
We use Simatic S7, STEP 7 V5.4 SP3. Into Simatic you have two sub-softwares to configure the Profibus Network : NetPro and HW Config.
NetPro: you define which kind of product you need on your Profibus network (TesysU, TesysT…)
HW Config:
-
- PLC hardware configuration
Configuration for each device Network (TesysT with or without expansion module, which control unit for TesysU and which information you want to exchange on the network)
- PLC hardware configuration
Causes and Fixes
This document will describe you how to configure TeSysU on a network Profibus with a PLC Siemens S300 station. The CPU is a CPU 315 - 2 DP with Profibus port embedded.
We use Simatic S7, STEP 7 V5.4 SP3. Into Simatic you have two sub-softwares to configure the Profibus Network : NetPro and HW Config.
NetPro: you define which kind of product you need on your Profibus network (TesysU, TesysT…)
HW Config:
-
- PLC hardware configuration
Configuration for each device Network (TesysT with or without expansion module, which control unit for TesysU and which information you want to exchange on the network)
- PLC hardware configuration
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.