Momentum I/O Base Ground Stud.
Issue
The purpose of this resolution is to inform Momentum I/O Base users of a potential ground stud issue affecting the product. During assembly, the screw which is used to secure a ground wire lug, was tightened beyond manufacturing specifications.
Product Line
Momentum
Resolution
On rare occasions, the solder connection of the I/O Base ground stud may break when loosening or tightening the ground stud screw.
Modules affected:
- All I/O Base model numbers.
- This issue may occur on I/O Base modules built before Aug. 2004 with a serial number of 210431xxxxx or less.
Modules not affected:- Modules with a serial number of 210431xxxxx and less with an 8-2004 label on the back of the modules have been inspected and are ok.
- Modules with a serial number greater than 210431xxxxx are ok.
Legacy KB System (APS) Data: RESL166464 V1.0, Originally authored by on , Last Edited by on
Related ranges: Modicon Momentum I/O
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.