How to do port mirroring in TCSESM Connexium switches ?
Follow the steps as given below :-
- Go to webpage of Connexium switch and log on through administrator user name and password.
- Click on port mirroring section on left pane window as shown below.
- Select source port to monitor the ethernet traffic of device connected to this port.
- Enable port mirroring feature by selecting operation as "ON"
- Select the destination port to which traffic management or monitoring software like wireshark to be connected.
- At last click on "Set" to load new configuration inside switch.
- Connect wireshark at port 5 of switch to take traces of device connected at port 4.
- Go to webpage of Connexium switch and log on through administrator user name and password.
- Click on port mirroring section on left pane window as shown below.
- Select source port to monitor the ethernet traffic of device connected to this port.
- Enable port mirroring feature by selecting operation as "ON"
- Select the destination port to which traffic management or monitoring software like wireshark to be connected.
- At last click on "Set" to load new configuration inside switch.
- Connect wireshark at port 5 of switch to take traces of device connected at port 4.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.