How can I associate a custom alarm sound for new alarms in PME?
Issue:
Customer would prefer to play a different sound when there is a new alarm in Power Monitoring Expert
Product Line:
Power Monitoring Expert 7.2.x
Environment:
Power Monitoring Expert Software Configuration
Cause:
The default sound for a new alarm may not be something the customer wants to listen to when they get a new alarm.
Resolution:
Navigate to the Power Monitoring Expert folder. Inside the system/etc folder there is an alarm.wav file. Replace that with the desired .wav file of your choice, Please note that the desired .wav file must be named alarm.wav or it will not play as desired, and this will be the new alarm that plays.
Customer would prefer to play a different sound when there is a new alarm in Power Monitoring Expert
Product Line:
Power Monitoring Expert 7.2.x
Environment:
Power Monitoring Expert Software Configuration
Cause:
The default sound for a new alarm may not be something the customer wants to listen to when they get a new alarm.
Resolution:
Navigate to the Power Monitoring Expert folder. Inside the system/etc folder there is an alarm.wav file. Replace that with the desired .wav file of your choice, Please note that the desired .wav file must be named alarm.wav or it will not play as desired, and this will be the new alarm that plays.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.