A simple example of a READ_REG function for Quantum TCP/IP communication.
Goals and Symptoms
A simple example of a READ_REG function for Quantum TCP/IP communication.
Causes and Fixes
The Ethernet communications can be difficult to program using Unity, since they vary from PAC family to family. This is one of a series of example applications that presents each function block in a working version for the user to build on.
Additional Information
The attached application read_reg.zef will continuously read ten registers from another device (using the READ_REG function block). The application consists of three sections. The first is an ST section in which variables are initialized. The second section, which is the example proper, is a LD section which uses CREAD_REG function block to read 10 registers from another device, the server. This message is sent out periodically based on a timer. The third section is another ST section that resets the timer and includes a couple of variables for debugging.
The IP address of the server is 192.168.1.30. This should be changed to suit your own addressing scheme. The application is annotated and should provide a start for the user of the CREAD_REG block. It is up to the user to change the PAC type and IP addresses to meet his or her own requirements. There is both a .zef and .xef version in the zip file.
A simple example of a READ_REG function for Quantum TCP/IP communication.
Causes and Fixes
The Ethernet communications can be difficult to program using Unity, since they vary from PAC family to family. This is one of a series of example applications that presents each function block in a working version for the user to build on.
Additional Information
The attached application read_reg.zef will continuously read ten registers from another device (using the READ_REG function block). The application consists of three sections. The first is an ST section in which variables are initialized. The second section, which is the example proper, is a LD section which uses CREAD_REG function block to read 10 registers from another device, the server. This message is sent out periodically based on a timer. The third section is another ST section that resets the timer and includes a couple of variables for debugging.
The IP address of the server is 192.168.1.30. This should be changed to suit your own addressing scheme. The application is annotated and should provide a start for the user of the CREAD_REG block. It is up to the user to change the PAC type and IP addresses to meet his or her own requirements. There is both a .zef and .xef version in the zip file.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.