How do you create segment names in ProWORX 32?
Issue
Create segment names in ProWORX 32
Product Line
ProWORX 32
Resolution
To give names to Segments in ProWORX 32, you need to first open the Documentation window. Enter the Segment reference number. For example, Segment 1 would be S01. Segment 20 would be S20. The Segment name can then be entered as a Descriptor and will show up in the Network Navigator window as the title of the Segment number. The Segment name will show up once you put the cursor back in the logic window. See the attached screen shot as an example.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.