Unable to use a Unity Momentum I/O Scanner service through a router
Issue
The Unity Momentum PLC could not communicate through a router with its I/O Scanner service.
The PLC could not I/O Scan through a router because it did not ARP for its Gateway Address. This issue was resolved in a firmware fix.
Product Line
171CBU98090
171CBU98091
Resolution
Firmware version affected: 1.0
Issue is resolved in firmware versions:
Patch version 1.1
Released version 1.2 and higher
The Unity Momentum PLC could not communicate through a router with its I/O Scanner service.
The PLC could not I/O Scan through a router because it did not ARP for its Gateway Address. This issue was resolved in a firmware fix.
Product Line
171CBU98090
171CBU98091
Resolution
Firmware version affected: 1.0
Issue is resolved in firmware versions:
Patch version 1.1
Released version 1.2 and higher
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.