[UP11] Why more than one M580 IOscanning rows are removed even i only removed one row.
Question:
After removing row number5 of Ioscaning from M580 Ioscanning list;
you will see only last two rows leave, all others are removed..
Answer:
Actually, it is not an issue, more than one Ioscanning rows be removed after you remove one row is because the scroll bar of Ioscanning window is automatically moved to the bottom, so you can only see the last two rows of Ioscanning.
move the scroll bar back to the top then you can see all the rest Ioscanning rows.
After removing row number5 of Ioscaning from M580 Ioscanning list;
you will see only last two rows leave, all others are removed..
Answer:
Actually, it is not an issue, more than one Ioscanning rows be removed after you remove one row is because the scroll bar of Ioscanning window is automatically moved to the bottom, so you can only see the last two rows of Ioscanning.
move the scroll bar back to the top then you can see all the rest Ioscanning rows.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.