What's the difference between reference XVUC29 and reference XVUC29P?
There are following differences:
1. XVUC29 is driven by ON/OFF signal and usually connect to relay, XVUC29P is driven by pulse signal and usually connect to PTO/PWM or transistor.
2. XVUC29 only can be changed color and mode by dip-switch, XVUC29P can be changed color and mode by input pulse signal.
3. XVUC29 supports maximum 5 layers, XVUC29P supports maximum 4 layers.
4. XVUC29 can be assembled in any layer, XVUC29P only can use under single color light unit.
1. XVUC29 is driven by ON/OFF signal and usually connect to relay, XVUC29P is driven by pulse signal and usually connect to PTO/PWM or transistor.
2. XVUC29 only can be changed color and mode by dip-switch, XVUC29P can be changed color and mode by input pulse signal.
3. XVUC29 supports maximum 5 layers, XVUC29P supports maximum 4 layers.
4. XVUC29 can be assembled in any layer, XVUC29P only can use under single color light unit.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.