Issue:
Is it possible to control speed of drive using 2 potentiometers in different locations?
Product Line:
All Altivar drive products.
Environment:
All models, All serial numbers
Cause:
Customer needs to be able to control the speed of the drive from 2 different locations at the same time.
Resolution:
No, this is not possible by using parallel potentiometers. The drive will only follow a single speed reference at any given time.
The drive can be switched between two different potentiometers via a logic input but it can not follow two different potentiometers at once.
Some drives allow 2 separate analog input signals to be summed or added together to set the speed reference.
Is it possible to control speed of drive using 2 potentiometers in different locations?
Product Line:
All Altivar drive products.
Environment:
All models, All serial numbers
Cause:
Customer needs to be able to control the speed of the drive from 2 different locations at the same time.
Resolution:
No, this is not possible by using parallel potentiometers. The drive will only follow a single speed reference at any given time.
The drive can be switched between two different potentiometers via a logic input but it can not follow two different potentiometers at once.
Some drives allow 2 separate analog input signals to be summed or added together to set the speed reference.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.
