Issue
In PME8.2 and previous versions
1. Too many registers exposed in Micrologic X driver (in this file only 66 measurements have been exposed similar to legacy Micrologic drivers)
2. IONReferenceName and MeasurementName attributes and not aligned MM_MeasurementMap and PDM labels respectively
Environment
EWS service
Resolution
1. Replace the Types.Measurements_MicrologicX file in C:\Program Files(x86)\Schneider Electric\Power Monitoring Expert\system\WebServices\Extensions
2. Update the EWS server in Management console
In PME8.2 and previous versions
1. Too many registers exposed in Micrologic X driver (in this file only 66 measurements have been exposed similar to legacy Micrologic drivers)
2. IONReferenceName and MeasurementName attributes and not aligned MM_MeasurementMap and PDM labels respectively
Environment
EWS service
Resolution
1. Replace the Types.Measurements_MicrologicX file in C:\Program Files(x86)\Schneider Electric\Power Monitoring Expert\system\WebServices\Extensions
2. Update the EWS server in Management console
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.
