Issue:
Change unit of torque to "Foot Pounds" on Altivar Process Drives ATV630/930
Product Line:
ATV630, ATV690 series drives.
Environment:
All models with firmware 1.6 or below.
Cause:
Information unavailable in current literature.
Resolution:
Currently, it is not possible to display torque as foot pounds on the ATV630 and ATV930 series drives. This information is current as of firmware release 1.6. An evolution has been created to have this feature added via a future firmware update. There is no ETA for this firmware release.
Change unit of torque to "Foot Pounds" on Altivar Process Drives ATV630/930
Product Line:
ATV630, ATV690 series drives.
Environment:
All models with firmware 1.6 or below.
Cause:
Information unavailable in current literature.
Resolution:
Currently, it is not possible to display torque as foot pounds on the ATV630 and ATV930 series drives. This information is current as of firmware release 1.6. An evolution has been created to have this feature added via a future firmware update. There is no ETA for this firmware release.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.
