A configuration in Mypact can be started in the following ways:
1) On the Mypact Home page - Select a Model to configure . Click on the Configure icon at the bottom to start the configuration.
2) Enter the Product code from a previous configuration.
3) Open a previously saved configuration from your PC (xml file).
4) Open a previously saved configuration from Cloud.
1) On the Mypact Home page - Select a Model to configure . Click on the Configure icon at the bottom to start the configuration.
2) Enter the Product code from a previous configuration.
3) Open a previously saved configuration from your PC (xml file).
4) Open a previously saved configuration from Cloud.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.