Why would an ATV12 not power up and have a blank display?
Issue:
ATV12 drive has a blank display.
Product Line:
ATV12
Environment:
All
Cause:
Main control board or power board is not working.
Resolution:
Troubleshooting
Check the Mains voltage on L1, L2 and L3
Measure the DC bus
Check your DC supplies on the control terminals.
Check to see if anything is wired to the +24vdc supply of so remove it and see if its pulling down the supply.
There are no replacement parts for this drive, so you will have to replace it, if the drive is inoperative.
ATV12 drive has a blank display.
Product Line:
ATV12
Environment:
All
Cause:
Main control board or power board is not working.
Resolution:
Troubleshooting
Check the Mains voltage on L1, L2 and L3
Measure the DC bus
Check your DC supplies on the control terminals.
Check to see if anything is wired to the +24vdc supply of so remove it and see if its pulling down the supply.
There are no replacement parts for this drive, so you will have to replace it, if the drive is inoperative.
Gepubliceerd voor: Schneider Electric Belgium
Hulp nodig?
Selecteer zelf het juiste product
Vind snel en eenvoudig de juiste producten en toebehoren voor uw toepassingen.
Offerte aanvragen
Dien uw aanvraag online in en een expert zal contact met u opnemen.
Verkooppunten
Vind eenvoudig de dichtstbijzijnde distributeur van Schneider Electric op uw locatie.
Help Center
Vind de antwoorden die u nodig heeft via bladeren door veelgestelde vragen over onderwerpen.